Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Orlando
When a gate stops opening in Orlando, you usually need two things: a straight answer and a tech who actually shows up. Most swing-gate actuator swaps in Orlando run $380 – $720 parts and labor, and most hinge or post repairs land between $210 and $480. We quote the price in writing before any work starts, so you’re not standing in the driveway doing mental math while a technician disassembles your gate. Call (850) 816-3017 and you’ll get a live person, not a voicemail tree. Our techs know Orlando’s neighborhoods, from Conway to Baldwin Park, and they arrive in uniform, background-checked, and ready to diagnose the specific operator on your property.
Why Portcullis Gate Repair Orlando Is Orlando’s Preferred Gate Repair Company
Portcullis Gate Repair is an independently owned Kingswell company, and every job carries the same four Kingswell Guarantee promises: a written price before work begins, a real arrival window, a clean job site, and a written guarantee on the repair. That’s not marketing language. It’s stamped on the invoice.
Orlando homeowners have been burned before. A tech no-shows. A quote doubles at the door. A repair fails six weeks later. We built our Orlando operation around the opposite behavior. Our Gate Repair team answers calls 24 hours a day, seven days a week, including holidays. If a repair fails inside the 365-day guarantee period, we come back and fix it at no charge under the 365-Day Done Right Promise. Dean Prescott runs the Orlando operation, and he holds every tech to the same standard: say the price first, show up in the window, leave the site cleaner than you found it.
Styles & brands we work with
Commercial Gate Repair in Orlando
Commercial Gate Repair in Orlando means dealing with operators that run hundreds of cycles a day, not a dozen. Apartments off Kirkman Road, warehouses near the 528, HOA entrances in MetroWest: these gates fail differently than residential units. The actuator, the motorized arm that physically pushes the gate open, wears out faster. Safety loops buried in asphalt break down. Control boards corrode from afternoon lightning and humid air. A commercial slide-gate operator replacement in Orlando typically runs $1,200 – $2,800 depending on the brand and horsepower. A full hydraulic swing-gate rebuild on a heavy ornamental gate can run $3,500 – $6,500. All of it quoted in writing before we turn a bolt.
Slide Gate Track and Roller Replacement
Heavy commercial slide gates in Orlando develop worn rollers and bowed tracks faster than most owners expect, especially where storm runoff keeps the track wet. We replace the rollers, realign the track, and set the gate speed so it doesn’t slam the end stop. Most commercial roller and track work runs $450 – $1,100.
Access Control Integration
When a gate won’t respond to a keypad or card reader, the problem is rarely the keypad itself. It’s usually the loop detector or the operator board. We test the full chain, from the reader to the relay to the motor, and replace only what actually failed. Service calls to integrate or repair access control on an Orlando commercial gate run $180 – $380 plus parts, diagnosed the same day.
Iron Gate Repair in Orlando
Iron Gate Repair in Orlando usually comes down to rusted weld points and sagging hinge posts. The humid subtropical climate means a painted steel gate that would last 15 years inland starts showing rust at the lower corners and hinge brackets inside six or seven. We cut out the rotted section, weld in new steel, and repaint with a zinc-rich primer that slows the corrosion cycle. A typical weld repair and repaint on a residential iron gate in Orlando runs $320 – $680. When the hinge post itself is rusted through or has shifted in the footing, we replace the post and re-pour the footing to current wind-load code. That job usually runs $480 – $950 per post.
Weld and Rust Repair
Pitted steel at a weld point is a structural issue, not a cosmetic one. We grind back to clean metal, rebuild the joint, and reinforce thin sections with gusset plates where the original design left the weld carrying too much load. The key is getting to the repair before the gate cracks through and drops onto the track or the driveway.
Hinge and Post Replacement
Most sagging iron gates in Orlando are post failures, not gate failures. The original post was sized for a lighter gate and never rated for years of wind gusting against a solid panel. We size the replacement post to the actual gate weight and current wind-load requirements, not the 1980s spec it was originally built to.
Trusted Brands We Service in Orlando
We train technicians on nine gate-operator brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters in Orlando because so many homes still run original LiftMaster and FAAC units from the 1990s and 2000s. The tech who arrives already knows the board layout, the limit switch configuration, and the failure points specific to that unit. We keep common replacement boards, remotes, and safety sensors stocked locally for Orlando service calls, so we’re not waiting on a part drop-shipped from Dallas.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Orlando Homes
- Salt air pitting aluminum welds: In neighborhoods like Baldwin Park and Celebration, decorative aluminum gates corrode at the weld points years before the rest of the panel shows wear. The salt-laden air pushed inland from the Atlantic weakens the aluminum at the heat-affected zone, and the gate eventually cracks at a corner weld or shears at a hinge bracket.
- Lightning-killed operator boards: Orlando’s summer thunderstorm pattern, with daily lightning strikes across the metro, fries control boards on older LiftMaster and DoorKing units. The gate works fine one afternoon, then sits dead after a storm. We replace the board and often add a surge protector at the disconnect so the next lightning season doesn’t produce a repeat failure.
- Rusted galvanized hinges and posts: Conway and Pine Hills have hundreds of gates with galvanized steel hinges that are 20 to 30 years old and rusting from the inside out. Galvanized hardware that would last decades inland snaps at the weld in 8 to 10 years here because the coating fails and the humid air does the rest.
- Sagging gates from undersized post footings: Many Orlando homes built in the 1980s and 1990s have ornamental gates that were never engineered for hurricane-force wind gusts. The post footing shifts, the gate sags, and the operator motor burns out trying to push a gate that’s now dragging. Replacing the footing is the real fix, and it’s one we do regularly across Orlando.
Pricing for Gate Repair in Orlando, FL
Here’s what Orlando homeowners can expect on a typical repair call. Service diagnosis runs $89 – $149, applied toward the repair if you approve the work. Hinge and bracket replacements run $210 – $480. Swing-gate actuator swaps run $380 – $720. Control board replacement on a LiftMaster or FAAC unit runs $280 – $520. A full weld repair and repaint on an iron gate runs $320 – $680. Post replacement with a new footing runs $480 – $950 per post. Every one of these prices is quoted in writing before work begins, and every repair carries the 365-Day Done Right Promise. Call (850) 816-3017 for a free estimate.
We Also Serve Cities Near Orlando
Our crews handle Gate Repair in Orlando daily, and we also cover Maitland, Altamonte Springs, Casselberry, and Apopka. If your gate is stuck open or won’t budge and you’re anywhere in the Orlando metro, call (850) 816-3017 and we’ll get you on the schedule with a real arrival window.
Serving Orlando, FL - Our Local Coverage Area
We’re based in the Orlando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Orlando
Salt-laden air from the Atlantic causes pitting at the heat-affected zone of the weld, weakening the joint until it cracks. This failure is most common on decorative aluminum gates from the 1990s and early 2000s. The fix is welding in a reinforcing gusset and often upsizing the hinge bracket so the corner weld is no longer carrying the full weight of the gate. Call (850) 816-3017 and we’ll assess the weld points before one gives way.
Most operators installed before 2000 were not sized for the heavier ornamental gates that later replaced the original lighter panels, and many are not compliant with current wind-load requirements. That mismatch is exactly what burns out motors. We check the gate weight, the post footing, and the operator rating before recommending a replacement that actually matches the load.
Every 8 to 10 years is realistic for galvanized steel hinges in Conway’s salt air and daily downpour cycle, where the same hinges might last 20-plus years inland. If you see rust streaks running down from the hinge pin or the gate has started dragging, plan for replacement before the weld snaps. A hinge replacement runs $210 – $480 per hinge set.
A lightning-induced surge has likely damaged the operator control board or the loop detector, causing phantom signals. It’s one of the most common post-storm calls we handle across Orlando. We test the board, the loop detector, and the wiring, replace the failed component, and usually recommend a surge protector at the disconnect. Call (850) 816-3017 and we’ll diagnose it same day.
Yes, and most sagging iron gates in Orlando are post failures, not panel failures. We replace the hinge post, re-pour the footing to current wind-load code, and re-hang the existing panel. If the panel itself has rusted through at the lower frame, we rebuild that section rather than quoting a whole new gate. Post replacement runs $480 – $950, and the existing gate usually stays.
If your gate is stuck, sagging, or showing rust at the welds, call Portcullis Gate Repair Orlando at (850) 816-3017. You’ll get a live person, a straight price range, and a written quote before any work begins.
Written by Dean Prescott, Owner at Portcullis Gate Repair Orlando, serving the Orlando metro since 2008.