Ghost Controls Electric Gate Repair Nationwide

Ghost Controls Electric Gate Repair in Orlando: What to Know First

Most Ghost Controls gate repairs in Orlando take one visit, and the price is agreed to before we touch a bolt. That’s the short answer. We’re an independent Ghost Controls service provider – not affiliated with or authorized by Ghost Controls – and we repair their swing and slide gate openers across Orlando, from Baldwin Park to Windermere to Lake Nona. Common jobs like a dead actuator arm or a keypad that stopped talking to the control board usually run $185 – $420 parts and labor. If your Ghost Controls system is acting up, call (850) 816-3017 and describe what it’s doing. We’ll give you a real number before we schedule the truck.

Call (850) 816-3017

This page is for Orlando homeowners and property managers who already own Ghost Controls equipment and need it working again. It covers the failure patterns we see most often, what repair actually costs here, and how we handle the job from first call to final test.

How Ghost Controls Products Fail – and How We Fix Them

Ghost Controls builds reliable residential gate operators, especially the AXDP and AXD series swing-arm actuators and the SLD series slide gate openers. But Orlando’s climate and daily use patterns create predictable failure points. Here are the five we see most often:

• Actuator arm failure on AXD and AXDP swing gates. The actuator is the motorized arm that physically pushes the gate leaf open and closed. In Orlando, the internal plastic drive gears inside these arms strip after years of heat cycling and humidity exposure. The gate will strain, click, or move in jerks. We replace the arm with a factory-fresh Ghost Controls unit when the gate’s duty cycle demands it, or a quality aftermarket arm when the customer wants to save money without losing torque.
• Control board damage from lightning and power surges. The AXD control board is sensitive to the electrical storms that roll through Central Florida every summer afternoon. A nearby strike or a surge on the branch circuit can fry the onboard relay or the accessory power terminals, which makes the gate unresponsive to remotes and keypads even though it still has power. We source OEM boards when warranty coverage matters, and we always add a surge-protected outlet or inline suppressor on the circuit so the next storm doesn’t take out the replacement board too.
• Safety photo-eye misalignment and false obstruction faults. Ghost Controls uses through-beam photo eyes at the gate opening, and in Orlando these sensors move out of alignment when gate posts shift in sandy or wet soil. That triggers false “obstruction detected” faults, and the gate refuses to close or reverses mid-travel. The fix is usually straightening the mounting brackets and re-aiming the beam, not replacing parts. It’s a 20-minute job and one of the most common Ghost Controls repairs we do in southeast Orlando neighborhoods.
• Remote and keypad pairing loss after battery changes. Ghost Controls remotes and the GDTX wireless keypad lose their learned codes when the gate loses power or a battery dies. Homeowners replace the battery, then the gate ignores them. We re-pair everything, clear the stored codes on the board, and can add fresh remote fobs the same visit while the system is open.
• Slide gate chain and limit switch wear on the SLD series. On Ghost Controls SLD slide gates, the chain stretches over time, and the magnetic limit switches that tell the gate where to stop drift. You’ll see the gate overshoot the closed position or stop a foot short. We tension the chain, reposition the limits, and verify the gate’s closing force at the same time, because bearing wear on the slide track in Orlando’s humidity often mimics a limit switch problem. Knowing which is which saves you from replacing parts that are still good.

Our Ghost Controls Electric Gate Repair Process

Here’s how a typical Ghost Controls repair works when you call Portcullis Gate Repair Orlando:

1. 1
   You call us at (850) 816-3017. A live person answers, day or night. You tell us the symptom: “the gate opens but won’t close” or “the keypad does nothing” or “the arm makes a clicking sound.” We’ll ask which Ghost Controls model you have and how old the system is.
2. 2
   We quote a price range before the truck rolls. Based on the symptom you describe, we give you the common price range for that repair. It’s a written estimate, not a dispatcher’s guess. The final quote is confirmed in writing at your gate before any work starts.
3. 3
   Our tech arrives in the window we gave you. Uniformed, background-checked, and driving a marked Portcullis truck. No third-party subcontractors. The tech who shows up is the same person who’ll do the work.
4. 4
   We diagnose at the gate, then put the exact price in writing. We open the operator cover, test the board outputs, check the photo eyes and limits, and measure the capacitor if the motor won’t start. You approve the written price before we disassemble anything beyond what diagnosis needs.
5. 5
   We repair, test, and walk the gate with you. Parts get replaced, the gate gets opened and closed repeatedly, the auto-close delay gets set to your preference, and the safety reverse gets tested with the gate force gauge. You watch it work before we leave.
6. 6
   We hand you the written Kingswell Guarantee. Every Ghost Controls repair carries a 365-day written guarantee. If the same repair fails inside that year, we return and make it right at no charge. No phone tag, no re-quoting.

What Ghost Controls Electric Gate Repair Costs in Orlando

Here are the price ranges we quote most often for Ghost Controls repairs in the Orlando area. These include parts and labor, and the number you get at your gate is the number on the invoice:

• Safety photo-eye realignment or replacement: $95 – $185
• Remote reprogramming (includes clearing and pairing all remotes): $75 – $140
• Wireless keypad replacement and pairing (GDTX or equivalent): $145 – $240
• Control board replacement (AXD or similar, OEM part): $295 – $490
• Swing-gate actuator arm replacement (AXDP or AXD, one arm): $310 – $560
• Slide gate chain tension, limit switch adjustment, and track bearing check: $160 – $310

What moves the price is mostly the part. OEM Ghost Controls boards and actuators cost more than quality aftermarket equivalents, and we’ll show you both options when the repair is safety-sensitive. If your gate has two actuator arms and one is still good, we inspect the surviving arm and tell you how much life it likely has left. You decide what gets replaced. The estimate is free, and it’s in writing before any work begins.

Why Orlando Homeowners Call Portcullis Gate Repair Orlando for Ghost Controls Work

Most of our Ghost Controls customers come from two places: a referral from a neighbor, or a bad experience with another gate company. They tell us the same stories. A tech quoted one price on the phone and a different one at the gate. A repair lasted three weeks. A company never returned the call. We built Portcullis Gate Repair Orlando to answer those problems with something written down.

Every repair, including Ghost Controls work, carries the 365-Day Done Right Promise. That means the guarantee is printed on your invoice, it covers the repair for a full year, and if it fails inside that period we come back and fix it at no charge. No deductibles, no service fees, no arguing. We also answer the phone 24/7 with a live person – that’s Dean Prescott’s rule, and it’s been the rule since 2008. As a Kingswell company, we hold to the four Kingswell Guarantee commitments on every job: a written price before work starts, a real arrival window, a clean job site when we leave, and a written guarantee on the repair. We also service LiftMaster, Mighty Mule, and DoorKing operators, so if your property has mixed brands across different gates, one tech can handle all of them in the same visit.

FAQs