A Portcullis company - serving Orlando, FL

Before & After Gallery - Portcullis Gate Repair Orlando

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Gate Repair Before & After in Orlando, FL

Photos tell the truth faster than any promise we could write on this page. A sagging gate, a dead opener, a hinge that screams every time the wind blows – most Orlando homeowners don’t know what “fixed” looks like until they see it side by side. These are real job scenarios from our Orlando service area, including College Park, Winter Park, Dr. Phillips, and Lake Nona. We’ve captioned each project so you know exactly what changed, why it mattered, and what it cost.

Call (850) 816-3017

Explore

Styles & brands we work with

Wrought iron
Wrought iron
Wood & steel frame
Wood & steel frame
Farm & ranch
Farm & ranch
Sliding driveway gates
Sliding driveway gates
LiftMaster operators
LiftMaster operators

Recent Transformations

Swing Gate Actuator Replacement in College Park

BeforeBeforeAfterAfter
Before: dead linear actuator, gate frozen half-open. After: new FAAC actuator, full travel restored.

The actuator – the motorized arm that physically pushes the gate open – had burned out after eight years of Orlando afternoon thunderstorms. The gate sat half-open for a week, which meant the driveway was exposed to the street. We replaced the actuator with a new FAAC unit, re-set the open and close limits, and adjusted the force so the gate stops if it meets resistance. Most swing-gate actuator swaps in Orlando run $450 – $850 parts and labor. Total job time: about two hours.

Slide Gate Off the Track in Kissimmee

BeforeBeforeAfterAfter
Before: steel V-track snapped, gate derailed into the lawn. After: new track section, gate rolls square.

The gate had jumped its track and the wheels had chewed a trench into the St. Augustine grass. A broken section of steel V-track was the culprit, likely from a vehicle clipping the gate months earlier. We cut out the damaged track, welded in a new section, trued the wheels, and added a catch roller so the gate can’t lift off the rail again. Slide gate track repair in the Kissimmee area typically runs $350 – $700 depending on how much rail needs replacing.

Electric Gate Dead After Lightning in Dr. Phillips

BeforeBeforeAfterAfter
Before: control board scorched, keypad dark, gate unresponsive. After: new LiftMaster board installed, remotes re-learned.

Florida lightning doesn’t need a direct hit to fry a gate control board. A nearby strike traveled through the low-voltage wiring and took out the main board on a LiftMaster LA400. The homeowner had no way to open the gate except the manual release, which isn’t something you want to do daily in July. We replaced the control board, installed a surge protector on the incoming power, and re-programmed all four remotes and the keypad. Control board replacement on an electric gate in Orlando generally runs $300 – $600.

Bent Gate Hinge and Sagging Leaf in Winter Park

Technician using an angle grinder for metal gate repair services.
Before: rusted hinge, gate leaf dragging on the driveway. After: new heavy-duty hinges, gate swings level.

This double swing gate had a leaf dragging so badly the bottom edge had worn flat against the concrete. One hinge had rusted through at the barrel, and the second was bent. We replaced both hinges with heavy-duty ball-bearing units, shimmed the leaf back to level, and re-balanced the weight so the opener wasn’t fighting dead load. Hinge jobs like this in Winter Park typically run $250 – $450 per leaf, including labor.

Vehicle-Damaged Gate Post in Lake Nona

Technician repairing a decorative stone gate post with sealant
Before: gate post knocked out of plumb, gate wouldn’t latch. After: post re-set in concrete, strike realigned.

A delivery truck caught the edge of the gate and shoved the post about three inches out of plumb. The latch no longer lined up, and the opener’s limit switch kept tripping because the gate thought it wasn’t closed. We dug out the old post base, re-set the post in fresh concrete, and re-aligned the latch and strike. The gate closes and locks again the way it should. Post reset and latch realignment around Lake Nona typically runs $400 – $750.

Keypad and Photo-Eye Upgrade in Baldwin Park

Two professional workers installing a large custom metal driveway gate.
Before: faded keypad, photo-eye misaligned, gate reversing randomly. After: new keypad, re-aimed sensors, smooth close.

The photo-eyes – the small sensors that detect anything in the gate’s path – had drifted out of alignment over three years of daily use and the occasional bump from a trash bin. The gate would reverse mid-close, then sit there looking broken. The keypad buttons were so worn you couldn’t read the numbers. We replaced the keypad, re-aimed both photo-eyes, and re-set the close timer. Job total: about ninety minutes on site, typically $200 – $350.

Want Results Like These?

Every job above started with a phone call and a written price before any work began. Call Portcullis Gate Repair Orlando at (850) 816-3017. A live person answers 24/7, and we’ll schedule a time that works for you. If it’s not done right, the 365-Day Done Right Promise means we come back and fix it at no charge. Written on every invoice, no fine print.

Written by Dean Prescott, Owner at Portcullis Gate Repair Orlando, serving Orlando and surrounding areas since 2008.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Need Gate Repair help in Orlando? Licensed & insured · 60-minute response · free estimates
Call (850) 816-3017
Local Service Coverage

Request a Free Estimate in Orlando

Tell us what you need - Portcullis Gate Repair Orlando responds fast. No obligation.

By reaching out through this form, you acknowledge our Privacy Policy and consent to receive communications by telephone, text message, or email about your request, including by the independent contractors we may refer it to.

Prefer to text? Text Us
Call Now - 24/7 Dispatch