Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterElectric Gate Repair in Orlando, FL
Electric gate repair in Orlando typically runs $160 to $420 for most service calls, with complete actuator or control board replacements landing between $650 and $1,900 depending on the operator brand and gate length. That’s the honest range before we ever step foot on your property. Portcullis Gate Repair Orlando handles stalled openers, dead keypads, grinding motors, and safety sensors that won’t cooperate – and we put the price in writing before a single bolt gets turned. If your gate is acting up, call (850) 816-3017 and you’ll get a live person, not a voicemail tree.
We’re an independently owned Kingswell company, which means every visit carries four promises: a written price up front, a real arrival window, a clean job site, and a written guarantee on the repair. Electric gates are complex systems – a circuit board, a motor, a receiver, and a set of safety eyes all have to talk to each other. When one component fails, the whole system feels broken. Our job is to find the actual fault, explain it in plain English, and fix it so you’re not calling us again next month. This is part of our broader Gate Repair service.
Key takeaways:
- Most electric gate repairs in Orlando cost between $160 and $420 for a single service call
- Every repair carries the 365-Day Done Right Promise, written on the invoice
- We service LiftMaster, FAAC, BFT, and Linear operator systems, among others
- A live person answers our phone 24 hours a day, including holidays
- You get the price in writing before any work begins
When You Need Electric Gate Repair
Orlando’s humidity and daily afternoon thunderstorms are hard on gate electronics. Moisture creeps into control boxes, corrodes limit switches, and shorts out circuit boards. We see certain failures so often in this market that we can usually diagnose them from a two-minute phone conversation. Here’s what typically brings customers to us:
- The gate won’t open or close at all. This usually points to a dead capacitor, a failed control board, or a tripped breaker. In neighborhoods like Dr. Phillips and Windermere, afternoon lightning strikes are a common culprit.
- The gate opens partway and stops. That’s often a worn limit switch or an obstruction sensor that’s misaligned. On older LiftMaster operators, we see this a lot after the gate gets bumped by a delivery truck.
- Grinding, squealing, or chattering noise. These sounds come from a failing actuator – the motorized arm that physically pushes the gate open – or from worn drive gears. Left alone, a noisy actuator becomes a seized actuator.
- The keypad or remote works intermittently. This can be a failing receiver board, a weak battery in the remote, or water intrusion in the keypad housing. In Baldwin Park and College Park, we regularly find keypads with corroded terminals from humidity exposure.
- The gate reverses after closing. Safety sensors – the photo eyes near the ground on either side of the gate opening – may be dirty, misaligned, or failing. Orlando’s rain and pollen coat these lenses quickly.
- The gate sags or scrapes the driveway. This is a mechanical problem, not an electrical one, but it strains the motor and shortens its life. We fix both in one visit.
If any of these sounds familiar, don’t wait until the gate fails completely at 7 a.m. on a workday. Call us at (850) 816-3017 and describe what you’re seeing. We’ll give you an honest read on what it likely is before we even schedule the truck.
Our Electric Gate Repair Process
We follow the same sequence on every job because it keeps surprises off the table. The Kingswell Way means saying the price before the work, showing up in the window we gave, leaving the place cleaner than we found it, putting the guarantee in writing, and coming back if it fails. Here’s how that plays out in practice:
- You call and a live person answers. Our phone line is staffed 24 hours a day, 7 days a week. We ask what the gate is doing, what brand the operator is, and when the problem started. You’ll have a real arrival window before we hang up.
- We arrive in the window and diagnose the fault. A background-checked, uniformed technician shows up in a marked vehicle. We test the operator, the sensors, the power supply, and the mechanical components to isolate the actual fault – not just the symptom.
- You receive a written price before any work starts. This is the part that separates us from companies that quote one number on the phone and another at the door. The written price covers parts and labor with no after-the-fact additions.
- We complete the repair and explain what we did. We fix the component that failed, then test the full open-close cycle multiple times to confirm the system is stable. We’ll show you exactly what we replaced and why it failed.
- We hand you a written guarantee and clean up. Every repair invoice carries the 365-Day Done Right Promise. If the repair fails within the guarantee period, we come back and correct it at no charge. The job site is left cleaner than we found it.
Electric Gate Repair Pricing in Orlando
What does an electric gate repair actually cost?
Most single-component repairs run $160 to $420 all in – that’s the service fee, the part, and the labor. Most swing-gate actuator swaps run $650 to $950 parts and labor. Control board replacements generally land between $400 and $850 depending on the operator brand. Complete operator replacement, when the motor and board are both beyond repair, runs $1,200 to $1,900 for a quality unit installed.
Here’s a line-item breakdown of what we typically see in Orlando:
| Repair Type | Typical Range (Parts & Labor) |
|---|---|
| Service call diagnosis (applied to the repair) | $85 – $125 |
| Sensor or photo-eye alignment/replacement | $160 – $280 |
| Remote or keypad replacement and programming | $140 – $300 |
| Limit switch replacement | $180 – $340 |
| Control board replacement | $400 – $850 |
| Actuator swap (swing-gate arm) | $650 – $950 |
| Complete operator replacement | $1,200 – $1,900 |
Three things affect cost more than anything else. First, the operator brand – FAAC and BFT parts run a bit higher than generic aftermarket components, but they fit properly and last longer. Second, the gate’s size and weight – a long, heavy gate needs a bigger actuator, and a bigger actuator costs more. Third, access – if the control box is buried in landscaping or the gate post is set in a tight corner, the labor takes longer.
Every quote includes the written price before work begins. If the repair cost gets close to replacement cost, we’ll tell you that plainly and let you decide. We’d rather have you as a customer for ten years than sell you a repair that doesn’t make financial sense. Estimates are free – call (850) 816-3017 and we’ll give you a straight answer.
Brands We Service
Our technicians train across nine major gate-operator brands, so the person who shows up already knows your system. In Orlando, we most commonly work on LiftMaster units in residential communities east of I-4, FAAC and BFT operators in the newer gated neighborhoods around Lake Nona, and Linear systems in properties built in the 2000s. When you call, tell us the brand on the control box – it helps us bring the right parts on the first trip.
FAQs – Electric Gate Repair
How much does electric gate repair cost in Orlando?
Most electric gate repairs in Orlando cost between $160 and $420 for a single service call including parts and labor, with actuator replacements running $650 to $950 and complete operator replacements running $1,200 to $1,900. The specific cost depends on the operator brand, the gate’s size and weight, and whether the fault is electrical or mechanical. Call (850) 816-3017 for an exact quote – estimates are free.
Can you fix my electric gate the same day?
In most cases, yes. We keep common LiftMaster, FAAC, BFT, and Linear parts on our trucks, which means roughly 70% of the repair calls we run in Orlando are completed on the first visit. If the right part isn’t on the truck, we’ll give you a firm return date before we leave. Call (850) 816-3017 and we’ll tell you straight what today looks like.
Is it cheaper to repair or replace my electric gate operator?
If the control board and actuator are both failed, or the operator is more than 15 years old with recurring problems, replacement usually makes more financial sense than repeated repairs. If the fault is a single component – a sensor, a limit switch, a keypad receiver – repair is nearly always cheaper. We’ll show you both numbers on the same invoice and let you decide without pressure. Call (850) 816-3017 for an honest assessment.
Do you guarantee your electric gate repairs?
Every repair carries the 365-Day Done Right Promise, written on the invoice. If the same repair fails within 365 days, we come back and correct it at no charge – no trip fee, no parts cost, no labor cost. That’s the guarantee, in writing, from Gate Repair in Orlando to your property line.
Can you come out on weekends or holidays?
Yes. A live person answers our phone 24 hours a day, 7 days a week, including holidays. If your gate is stuck open and leaving your property exposed, we’ll get someone out to you as quickly as schedule allows. Call (850) 816-3017 whenever the gate fails – someone will pick up.
Why Orlando Homeowners Choose Portcullis Gate Repair
We opened in 2008, and the story we hear over and over from new customers is the same: they already paid a company that didn’t show up, or showed up and doubled the price, or fixed the gate and disappeared when it failed six weeks later. That’s the frustration we built this company around not repeating. Every Portcullis location is independently owned and operated but held to the identical Kingswell Guarantee – a written set of promises, not a franchise slogan. Dean Prescott runs our Orlando location, and the standard he holds is the same one every Kingswell company signs: written price, real arrival window, clean job site, written guarantee on every repair.
The home service experience shouldn’t require three phone calls and an afternoon of your time. You call. A person answers. We show up in the window. We fix the gate and hand you a written guarantee. That’s it.
If your electric gate is acting up in Orlando, call (850) 816-3017 now for a free estimate. We’ll answer in person, give you a straight price range, and get your gate working right – done right the first time, or we come back at no charge.
Written by Dean Prescott, Owner at Portcullis Gate Repair Orlando, serving Orlando.