Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Lake Mary
An electric gate that won’t open in Lake Mary is more than a nuisance. It traps your car in the driveway, leaves your property unsecured, and in a master-planned community like Timacuan or Magnolia Plantation, it’s the kind of thing that lands on an HOA board agenda fast. Our Electric Gate Repair technicians work on custom ornamental gates, heavy sliding gates, and every operator in between across Lake Mary, and we answer the phone around the clock. Call (850) 816-3017 and a live person picks up. Not a callback queue. Not a voicemail tree. A person who can schedule your repair and give you a written price before any work begins.
Why Portcullis Gate Repair Orlando Is Lake Mary’s Preferred Electric Gate Repair Company
Lake Mary homeowners don’t tolerate sloppy work, and neither do the HOAs that govern communities like Heathrow, Timacuan, and Magnolia Plantation. That’s why we run every job through the Kingswell Guarantee: a written price before a single bolt is turned, a real arrival window, a clean job site, and a written guarantee on the repair itself. If a repair fails within 365 days, we come back and make it right at no charge. That’s the 365-Day Done Right Promise, and it’s stamped on every invoice we hand a Lake Mary customer.
Our techs arrive in uniform, background-checked, and already familiar with the operator on your gate. We service LiftMaster, FAAC, Elite, and Mighty Mule systems, along with five other major brands, so the person at your driveway isn’t learning your gate’s wiring for the first time. For Lake Mary’s higher-end properties, that matters. A custom wrought-iron swing gate in Heathrow isn’t the same job as a basic aluminum opener in Casselberry.
Styles & brands we work with
Automatic Gate Repair in Lake Mary
Automatic gate repair in Lake Mary runs the full range from a simple keypad reprogram to a full operator swap on a 16-foot custom gate. The job involves tracing the fault to its source, whether that’s a burned control board, a sagging hinge that’s overloading the motor, or a buried low-voltage wire that’s shorting out the entire system. In Lake Mary’s older 1980s-era subdivisions and newer estate sections alike, the operator itself is often blamed for problems that actually live in the wiring, the loop detector, or the safety sensors.
Operator Swaps and Board Replacement
When a lightning strike takes out a control board, the repair usually isn’t just swapping a part. We match the new board to the existing operator, re-sync all remotes and keypads, and test the full safety cycle. Lake Mary homeowners in Timacuan have called us after storms to find a gate stuck half-open, no visible damage, and a board that’s dead on the bench. We fix it same day.
Safety Sensor and Keypad Repair
Photocells and keypads fail slowly in Central Florida’s heat and humidity. Corrosion builds on splice points, condensation fogs the sensor lenses, and keypad buttons wear out from daily use. We replace sensors with UV-resistant units and rebuild keypads so they read reliably, not intermittently.
Electric Gate Motor in Lake Mary
Electric gate motor repair in Lake Mary often involves the actuator, the motorized arm that physically pushes the gate open, and the motor’s internal gearing. Most swing-gate actuator swaps run $540 – $1,150 parts and labor in this market, depending on the weight and width of the gate. A lightweight aluminum single gate costs less; a heavy custom wrought-iron gate in the Heathrow estate sections costs more because the motor has to work harder and the swap takes longer.
In-Ground and Underground Operators
High-end Lake Mary properties sometimes use underground operators, which stay hidden beneath the gate hinge. These units fail in our climate because groundwater and humidity work their way into the housing over years. Replacing one means excavating carefully, matching the new motor’s profile to the existing foundation, and re-routing loop detector leads. It’s a multi-hour job, and it’s not the place for a handyman. The Kingswell Guarantee covers this work for a full year, written on the invoice.
Slide Gate Motor and Track Repair
Heavy slide gates in Lake Mary, particularly custom ones on newer estate lots, strain their motors when the gate sags and drags on the track. We re-shim the gate, adjust the rack and pinion drive, and replace the motor if it’s already been cooked by the extra load. Left alone, a dragging slide gate will strip the drive gear and leave you with a gate that won’t move at all.
Trusted Brands We Service in Lake Mary
Our Lake Mary customers run a mix of brands, but we see LiftMaster, FAAC, Elite, and Mighty Mule more than any others. We carry boards, remotes, sensors, and actuators for all of them on the truck, which means fewer return trips and a faster fix at your driveway. Because we’re an independently owned Kingswell company, we don’t push one brand over another. We service the system you have, and our techs are trained on nine major gate-operator brands. That’s the whole point of the Kingswell way: show up, say the price, do the work, put the guarantee in writing.
Common Electric Gate Repair Problems We See in Lake Mary Homes
- Lightning-fried control boards. Summer afternoon storms in Central Florida send power surges through gate operators, especially in neighborhoods with older electrical service. A LiftMaster or FAAC board can look fine on the outside and be dead on the inside. We bench-test before we replace anything.
- Corroded photocells and splice points. High humidity in Magnolia Plantation and other tree-lined Lake Mary neighborhoods accelerates corrosion on sensor housings and low-voltage splice connections. The result is a gate that reverses randomly or refuses to close on an obstruction that isn’t there.
- Sagging custom gates in Timacuan. Heavy ornamental steel and wrought-iron gates slowly lean and drag over years, stripping rack and pinion drives on slide gates and overloading swing gate motors. Re-shimming the gate early is a $200 – $400 fix; replacing a stripped drive a year later is $900 – $1,600.
- Shared low-voltage faults in Heathrow. In Heathrow’s estate sections, gates are often wired into the same low-voltage runs as landscape lighting and irrigation controllers. A short in a buried junction can take out the gate, the accent lights, and the sprinkler zone all at once. We trace the run and isolate the fault without leaving the other systems dead.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Lake Mary, FL
Here are honest ranges for Lake Mary’s market. A keypad replacement runs $220 – $480. A photocell or edge sensor replacement runs $180 – $420. A control board swap runs $380 – $850 on most residential operators. A swing-gate actuator or motor swap runs $540 – $1,150, and a full slide gate motor and track service runs $800 – $1,800 depending on gate weight and damage. Underground operator replacements start around $1,800 and go up from there. Every quote is written and agreed before we start, so the invoice you sign matches the price we gave you. Call (850) 816-3017 for a free estimate and we’ll tell you the range for your specific gate before we even schedule the visit.
We Also Serve Cities Near Lake Mary
Our Electric Gate Repair in Lake Mary coverage extends to neighbors in Altamonte Springs, Casselberry, Oviedo, and Maitland. If you’re in one of those communities, the same written-price Kingswell Guarantee applies, and the same live person answers the phone. We schedule locally, so you’re not waiting on a truck from across the state.
Serving Lake Mary, FL - Our Local Coverage Area
We’re based in the Lake Mary area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Lake Mary
A lightning strike or power surge can fry the control board inside your gate operator without leaving any visible burn marks or damage on the outside. This is the most common storm-related call we get in Lake Mary. The fix is a board replacement, which typically runs $380 – $850 on residential operators, and we bench-test the old board before we quote the repair. Call (850) 816-3017 and we can walk you through what we’re seeing.
Yes. In Heathrow’s estate sections, a gate that shares low-voltage wiring with landscape lighting or irrigation often fails because of a short in a buried junction, not the operator itself. We trace the run, isolate the short, and repair the gate circuit without leaving your landscape systems dead. This is the exact kind of shared-wiring fault that generic gate companies miss, and it’s one of the most common calls we run in Lake Mary.
Yes. A sagging iron or steel gate can almost always be re-shimmed, re-hung, and re-balanced without changing the panel or altering the gate’s appearance. The HOA’s concern is aesthetic consistency, and our repair doesn’t change what the gate looks like. The fix typically runs $200 – $600, depending on gate weight and hinge condition, and it keeps the motor from wearing out prematurely.
We recommend servicing your electric gate once a year in Lake Mary. Central Florida’s heat, humidity, and summer lightning season wear on hinges, operators, and electronics faster than most homeowners expect, and an HOA in communities like Timacuan will flag a broken gate quickly. An annual service catches corrosion, sag, and board fatigue before they become a failed gate. Call (850) 816-3017 and we’ll set a reminder for next year.
Yes. Older slide gates in Lake Mary often have sun-damaged photocells that no longer meet UL 325 entrapment standards, which is a safety concern, not just a compliance one. We install UV-resistant photocells and retest the full entrapment protection cycle, including the reversing edge where applicable. The upgrade typically runs $180 – $420 per sensor set. This work is done carefully by a trained professional because entrapment protection on a moving gate is a genuine safety issue.
Call Portcullis Gate Repair Orlando for Electric Gate Repair in Lake Mary
If your gate is stuck, sagging, or dead after a storm, call (850) 816-3017. A live person answers, gives you a straight answer, and schedules a window we actually keep. You’ll get a written price before any work starts, and everything we do is covered by the Kingswell Guarantee and the 365-Day Done Right Promise. We’ve been doing this since 2008, and we’re held to the same standard on every Lake Mary job: say the price, show up, leave it clean, and put the guarantee in writing.
Written by Dean Prescott, Owner at Portcullis Gate Repair Orlando, serving Lake Mary with same Kingswell Guarantee since 2008.