Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Maitland
New gate installation in Maitland typically runs $2,800 to $11,000 for most residential properties, with custom ornamental work on lakefront estates pushing higher. We schedule a free measure and written quote within a few days, and most standard installations go in within two to three weeks once materials arrive. Call (850) 816-3017 if you’re ready to talk through what your driveway actually needs.
We work throughout Maitland, from Dommerich Hills down to the tree-lined streets off 17-92. Our crews know which lots have sandy soil that shifts after a hard rain, which older brick pillars hide crumbling mortar, and which gate motors survive Florida’s summer lightning better than others. That local knowledge shows up in how we set footings, mount operators, and match ironwork. When you call, you’ll get a straight answer about what’s possible on your specific property before anyone schedules a visit.
Why Portcullis Gate Repair Orlando Is Maitland’s Preferred Gate Installation Company
We’ve been doing Gate Repair - Maitland as a Kingswell company since 2008, and the Maitland jobs we get tend to come from referrals. A homeowner off Dommerich Drive has a neighbor with a 1950s swing gate that finally failed. They see the new gate, ask who did it, and call us. That’s how most of our work in Maitland spreads, and it keeps us honest. A bad installation travels just as fast.
Every tech who rolls into Maitland is background-checked and wear a uniform. You’ll know their name before they arrive, and they’ll show up in the window we gave you, not sometime vaguely “this afternoon.” That matters when you’ve taken a morning off work to meet them. We’re held to the same Kingswell Guarantee at every Portcullis location: a written price before any work starts, a real arrival window, a clean job site, and a written guarantee on every repair. This location is independently owned and operated, run by Dean Prescott, but the guarantee isn’t a suggestion. It’s printed on the invoice.
One more thing about how we work in Maitland: when a gate fails inside 365 days after we install or repair it, we come back and fix it at no charge. The 365-Day Done Right Promise is what it sounds like. If it’s not done right, we make it right.
Styles & brands we work with
Gate Installation Services in Maitland
Gate Installation services in Maitland cover everything from a first-time sliding gate on a ranch home to a full custom double gate on a lakefront estate. The job starts with a site measure where we check the driveway width, post condition, soil, and grade. Then you get a written quote with the gate material, operator, hardware, and labor broken out line by line. Nothing gets bolted down until you’ve seen and approved that number.
Custom Wrought Iron and Steel Gates
Many Maitland homes still have original 1920s era wrought iron gates that can’t be replaced with an off-the-shelf panel. When we install new work on those properties, we match the scrollwork, bar spacing, and finish to the existing iron. That often means custom fabrication rather than a catalog order, and we quote it accordingly.
Driveway and Pedestrian Gate Installation
We install driveway gates, pedestrian gates, sliding gates, swing gates, double gates, and security gates. For mid-century ranch lots in Maitland, the most common install is a single swing gate with a low-voltage operator. For newer infill construction with tighter setbacks, a sliding cantilever gate often makes better use of the space.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation in Maitland
Electric Gate Installation in Maitland means pairing the gate itself with automation that won’t fail the first time a thunderstorm rolls through. That’s a real concern here. Summer lightning and power surges from the grid are the two biggest killers of gate operator control boards we see in Maitland, especially on lakeside properties that sit open to the sky. We size the operator to the gate’s actual weight and travel, not the other way around.
Operator and Control Board Installation
We service and install operators from LiftMaster, FAAC, BFT, and Linear. For a heavy custom iron gate on Dommerich Hills, a worm-drive or hydraulic operator from LiftMaster or FAAC usually handles the weight better than a residential-grade unit. We also recommend and install surge suppression at the operator’s power feed. It costs $75 to $250 and has saved more than one Maitland homeowner a $600 control board replacement.
Keypad, Intercom, and Access Setup
Most Maitland homeowners want a keypad at the street plus integration with an existing intercom or a phone-based entry app. We wire the gate to the keypad, and when there’s an intercom on the property, we sync the command so a visitor call triggers the gate relay. It’s not exotic. It’s just sequential wiring and a clean panel.
Trusted Brands We Service in Maitland
We stock common parts for LiftMaster, FAAC, and BFT operators right on the truck, so a control board swap or limit switch replacement on a Maitland property usually happens same appointment. LiftMaster’s swing and slide operators are the most common residential units in the area. FAAC is what we see most often on older estate gates, largely because their hydraulic operators handle weight well. BFT shows up on newer mid-century ranches where builders spec’d a mid-tier automation package. We service all three daily, and our techs arrive knowing the specific system on your property before they even see it.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Installation Problems We See in Maitland Homes
- Rust jacking at the hinge post on original wrought iron. On 1920s through 1950s gates in Dommerich Hills and around Lake Maitland, rust builds between the hinge plate and the post, forcing the gate to sag. Standard sag correction kits don’t fix this because the hinge geometry itself has shifted. We cut out the rusted section, fabricate a new hinge plate, and re-hang the gate to clear the original brick pillars.
- Lightning and surge damage on lakeside automatic gates. Maitland’s summer thunderstorms are intense, and a nearby strike sends a surge straight through the power feed into the operator control board. Homes without whole-house surge protection on the gate circuit lose the board more often than not. We now spec inline surge suppression on every automatic gate installation in Maitland, especially those within a block of any of the chain of lakes.
- Shallow post footings in sandy, saturated soil. Mid-century Maitland lots often have sandy soil that holds water after heavy rain. Installers who pour a standard 30-inch footing without accounting for soil movement end up with posts that lean within a few years. We over-excavate and pour deeper footings with proper drainage on new installations, because fixing a leaning post later means tearing up the driveway apron.
- Oversized operators stressing the rack and pinion. When a homeowner or a previous company paired a heavy double gate with an undersized operator, the motor burns out or the rack teeth strip. On replacement installs, we weigh the gate panel, measure the travel distance, and match the operator to the actual load. It takes an extra 20 minutes on the measure call and prevents most operator failures we see on Maitland’s larger estate gates.
Pricing for Gate Installation in Maitland, FL
A single swing driveway gate in Maitland runs $2,800 to $5,500 installed, depending on gate material and width. Add an automatic operator and you’re at $4,500 to $8,000. Double gates run $5,500 to $11,000. A custom wrought iron gate matched to original Dommerich Hills scrollwork runs higher because of the fabrication time: most run $7,000 to $15,000 installed. Pedestrian gates are $900 to $2,200. Every quote we give in Maitland is written, itemized, and agreed before any work starts. You’ll never get a call from our tech saying the job ran over. Call (850) 816-3017 for a free estimate and a straight number.
We Also Serve Cities Near Maitland
Our crews serve Maitland and the surrounding communities, including Altamonte Springs, Casselberry, Orlando, and Apopka. If you’re on the edge of Maitland near the Winter Park border or up toward Eatonville, call and we’ll tell you straight whether you’re in our regular service area.
Serving Maitland, FL - Our Local Coverage Area
We’re based in the Maitland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Maitland
Yes. We can mount a new automatic gate to the existing brick pillars as long as the pillars are structurally sound, which we verify by probing the mortar and checking for movement. In Maitland’s older lakefront homes, the pillars are often in decent shape while the gate itself is sagging or the operator is dead. We fabricate hinge posts to match the pillar width, anchor them with deep set bolts, and hang the new gate to clear by the proper margin. If the pillar core is crumbling, we’ll tell you that too, and quote a rebuild or a steel post wrapped in brick veneer.
A LiftMaster or FAAC operator with inline surge suppression on the power feed is what we recommend for lakeside Maitland driveways. The surge protector is the more important half of that answer. Lightning doesn’t have to strike the gate directly; a nearby strike traveling through the grid will fry an unprotected control board. We install a surge suppressor at the operator’s junction box on every lakeside automatic gate in Maitland, and we recommend a whole-house surge protector at the main panel as a second layer. Call (850) 816-3017 and we’ll quote the operator and the protection together.
Because the hinge post is rusted, not the panel. On Maitland’s original 1920s and 1930s gates, rust builds up between the hinge plate and the post, which slowly forces the gate out of alignment. You can straighten the panel all you want, but the hinge geometry stays wrong. We fix this by removing the rust, fabricating a new hinge plate that matches the original scrollwork, and re-hanging the gate. That’s the difference between a repair that lasts and one that has to be redone every few seasons.
Yes. We’ve matched scrollwork on Dommerich Hills gates by taking a section to our fabricator and having the new iron bent to match the original bar diameter, curl radius, and finial shape. It’s not a catalog part. It’s custom work, and it costs more than a standard panel because someone is hand-forming the iron. But when you’re extending a 1930s gate line or adding a matching pedestrian gate next to the original driveway gate, that’s the only way it doesn’t look like a patch job.
Yes, and they’re a good fit for Maitland’s older brick and paver driveways where a surface-mounted arm would look out of place. Underground operators sit below grade and drive the gate from a buried gearbox, so the driveway stays clean. The tradeoff is installation cost and drainage: the box has to be set in a properly drained vault, because our sandy soil holds water after storms and a flooded gearbox is a dead gearbox. For a lakefront estate on Dommerich Drive, we set the vault with a drain line and gravel bed. Expect an underground operator to add $1,800 to $3,500 over a standard surface mount depending on the gate weight and existing paver layout.
Written by Dean Prescott, Owner at Portcullis Gate Repair Orlando, serving Maitland as an independently owned Kingswell company since 2008.