Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterLock Repair in Orlando, FL
Lock repair in Orlando usually means one of three things: a key that won’t turn, a latch that won’t catch, or a lock that’s been forced and no longer holds. Most residential gate lock repairs in this area run between $95 and $285 depending on whether we’re replacing a cylinder, rebuilding a latch assembly, or swapping out an electric strike. If you’re standing at your gate right now with a key that spins in the lock, call (850) 816-3017 and we’ll give you a straight answer about what you’re looking at.
We’re Portcullis Gate Repair Orlando, an independently owned Kingswell company, and lock repair is one of the most common calls we run across the metro area. It’s a small part of the gate system until it fails, then it’s the only part that matters. Before we turn a single screw, you’ll have a written price in hand. That’s the Kingswell Way, and it applies to every repair we do, whether it’s a full Gate Repair in Orlando or a simple lock cylinder swap.
Dean Prescott has been running this location with the same standard since the company opened its doors in 2008: answer the phone, show up when we say, fix it right, and put the guarantee in writing.
When You Need Lock Repair
Some lock problems announce themselves loudly. Others fail slowly over weeks until one morning the key simply won’t engage. Here’s what we see most often in Orlando neighborhoods like College Park, Baldwin Park, Conway, and Dr. Phillips:
- The key turns but the gate won’t open. This usually points to a broken tailpiece inside the lock body, the small metal bar that connects the cylinder to the latch. Common on older wrought-iron gates throughout the Winter Park and Audubon Park areas.
- The key won’t turn at all. Humidity is rough on gate locks, especially near the lakes. Corrosion inside the cylinder pins is the usual culprit, and it tends to get worse during Orlando’s wet season from June through September.
- The latch doesn’t catch when the gate closes. A sagging gate shifts the strike plate out of alignment. The lock itself may be fine, but the latch bolt has nothing to seat into. We see this constantly on heavy steel gates in MetroWest and Hunter’s Creek.
- Someone tried to force the gate open. A twisted latch or a cylinder that’s been drilled or punched will not hold. This is a security problem, and it should not wait until tomorrow.
- An electric lock or strike stopped releasing. LiftMaster and FAAC operators often pair with an electric strike on the pedestrian gate or the vehicle gate’s keypad entry. When the strike fails, the opener may still cycle but the gate stays locked.
- The key broke off inside the cylinder. Or worse, the key snapped while the gate was locked. We extract broken keys without wrecking the surrounding lock body, which saves you from replacing hardware that still works.
If your gate lock matches any of the above, call us at (850) 816-3017. A live person answers, day or night. We’ll tell you what we think is going on and what it’s likely to cost before a technician ever gets in the truck.
Our Lock Repair Process
Every lock repair in Orlando follows the same sequence. It’s simple, it’s fast, and you always know where you stand on price before work begins.
- You call and describe the symptom. We answer live, 24/7. You tell us what the lock is doing or not doing, what kind of gate it’s on, and roughly where you’re located. We’ll give you an honest ballpark based on what you describe.
- We arrive in the window we gave you. Our technicians are background-checked and wear Portcullis uniforms. When the truck pulls up, you’ll know exactly who’s walking through your gate.
- We inspect the full lock assembly. Cylinder, latch, strike plate, and any electric release mechanism. We check the gate’s alignment too, because a sagging gate will destroy a brand-new lock within months.
- You get a written price before any work starts. Not a verbal estimate. A written figure covering parts and labor. If we find something else during the repair, you hear about it and approve it before we touch it.
- We repair or replace the damaged components. We carry common cylinders, latch assemblies, and strikes on the truck, so most lock repairs are completed in a single visit.
- We test the lock through multiple cycles and hand you a written guarantee. The 365-Day Done Right Promise is stamped on your invoice. If the repair fails inside a year, we come back and fix it at no charge.
Lock Repair Pricing in Orlando
Lock repair costs in Orlando fall into a fairly predictable range. The biggest variable isn’t the lock itself, it’s whether gate realignment or the operator’s release mechanism is also involved. Here’s what we typically quote, parts and labor included:
- Cylinder replacement or rekey: $95 – $145 for most residential gate locks. If you want the new cylinder keyed to match an existing key, add a small service fee.
- Broken key extraction and cylinder repair: $110 – $175 depending on how deeply the key fragment is lodged and whether the pins are salvageable.
- Latch and strike plate realignment: $85 – $150. This includes adjusting the gate if it’s sagging enough to throw the latch out of line.
- Full lock body replacement: $160 – $285 for typical residential swing or slide gate lock assemblies. Heavy commercial hardware runs higher.
- Electric strike or solenoid replacement: $180 – $340 including the part, common on gates wired to LiftMaster, FAAC, or BFT operators.
Older Orlando homes with original ornamental iron gates sometimes have locks that were custom-made or are no longer manufactured. In those cases, we’ll give you the price for the closest drop-in replacement plus any fabrication time if the gate needs the lock pocket modified.
Every estimate is free, and every job gets a written price before any work starts. No surprise line items added at the end. If you’re unsure whether your situation is a $100 fix or a $300 fix, call (850) 816-3017 and describe it. We’ll tell you what’s realistic.
FAQs – Lock Repair
How much does gate lock repair cost in Orlando?
Most residential gate lock repairs in Orlando run between $95 and $285, with cylinder replacement at the low end and a full electric strike or lock body replacement at the high end. The final price depends on whether the lock itself failed or whether weld and rust damage caused the latch to break. Call (850) 816-3017 for an exact quote after we look at the lock; estimates are free and we give you the price in writing before any work begins.
Can you repair a gate lock the same day?
Yes, in most cases. We carry common cylinders, latch assemblies, and strikes on our service trucks, so a straightforward lock repair is usually finished on the first visit. If your gate is stuck closed or the lock was forced, call us right away and we’ll work you into the schedule.
Is it cheaper to repair or replace a gate lock?
If the cylinder is the problem, repair or replacement is nearly always cheaper, $95 to $175 in most cases. If the lock body itself is bent, cracked, or rusted through, replacing the whole assembly makes more sense than patching damaged hardware. We’ll show you the condition of the parts and give you both prices in writing before you decide.
Do you work on electric gate locks and keypad strikes?
Yes. We service and replace electric strikes and solenoid releases on gates running LiftMaster, FAAC, BFT, and Linear operators. If your keypad accepts the code but the gate won’t release, the problem is often the strike rather than the keypad or the automatic gate opener, and we can diagnose it on site.
Why Orlando Homeowners Call Portcullis for Lock Repair
Most of our customers have already been burned once by another gate company. Maybe the tech never showed. Maybe the price doubled when the work was half done. Maybe the fix lasted three weeks. Those frustrations are the reason the home-owning customers we work with tend to stay with us.
The Kingswell Guarantee is four promises on every job, lock repair included: a written price before work starts, a real arrival window we actually keep, a clean job site when we leave, and a written guarantee on the repair. That last one has teeth. The 365-Day Done Right Promise means if your lock repair fails within a year of the invoice date, we return and correct it at no charge. Not a pro-rated credit. Not a “come back and we’ll take a look.” A free second visit.
Each Portcullis location is independently owned and operated, but every one is bound to the same Kingswell standard. It’s not a franchise promise. It’s a written one, stamped on every invoice that leaves our truck. Dean Prescott and the team at this Orlando location have stood behind it since 2008.
If your gate lock is giving you trouble, or if it’s already given up entirely, call (850) 816-3017. A live person answers. We’ll talk through what’s happening, give you an honest range, and set a real arrival window. The estimate is free, and so is the second visit if we don’t get it right the first time.
Written by Dean Prescott, Owner at Portcullis Gate Repair Orlando, serving Orlando.