Gate Repair in Orlando - Same-Day Repair, Priced Before We Start

Trusted Gate Repair for Orlando Homeowners

A gate that won’t open or close isn’t just a hassle. It traps your car in the driveway, leaves your backyard exposed, and if it’s a heavy slide gate, it can be genuinely dangerous. Portcullis Gate Repair Orlando has fixed thousands of gates across the city since 2008, and most repair calls get a same-day or next-day visit from a background-checked, uniformed technician. Call (850) 816-3017 and you’ll talk to a live person, not a voicemail tree, any hour of the day or night.

Call (850) 816-3017

We’re an independently owned Kingswell company, which means every job follows the same four promises: a written price before any work starts, a real arrival window, a clean job site, and a written guarantee on the repair. Dean Prescott leads our Orlando shop, and he holds every tech to the 365-Day Done Right Promise. If a repair fails inside that year, we come back and fix it at no charge. No fine print, no arguing. It’s written on the invoice.

This page covers the gate repair services we handle most around Orlando, from home driveway gates to commercial slide gates. If you already know what’s wrong, skip ahead to the section that fits. If you’re not sure, call us and describe the symptom. We’ll give you a real dollar range before we ever roll a truck.

Driveway Gate Repair

Driveway gate repair is the work of diagnosing and fixing an automatic or manual gate at the entrance to a residential property. In Orlando, we see three problems more than anything else: an operator that hums but won’t move the gate, a gate that sags and scrapes the concrete, and a safety sensor that keeps the gate from closing. Our automatic gate repair technicians handle all of these issues daily. Portcullis Gate Repair Orlando sends a tech who already knows your operator brand, and most driveway gate repairs run $180 to $340 for parts and labor, with the price written down before we touch a bolt.

Sagging and Dragging Gates

A steel or iron gate that sags is almost always a hinge & post repair problem, not a motor problem. We weld or re-shim the hinges, re-set plumb on the post, and adjust the opener so it isn’t fighting extra weight.

Left alone, a dragging gate burns out the actuator. That turns a $200 hinge fix into a $700 actuator replacement. We’d rather fix it the cheaper way the first time.

Operator That Runs But Won’t Move

This usually points to a broken drive chain, a stripped gear, or a shear pin that sacrificed itself to protect the motor. We bring OEM parts for LiftMaster, FAAC, BFT, and Linear units, so the repair usually happens in one visit.

The price range for this repair is $210 to $390 in Orlando, depending on whether we’re replacing a gear assembly or the full drive arm.

Gate Welding

Gate welding is the repair of cracked, rusted, or broken metal on a gate’s frame, hinges, or decorative elements. In Orlando’s humid climate, mild steel gates rust from the inside out, and what looks like a surface crack is often a structural failure waiting to drop the gate. Portcullis Gate Repair Orlando welds on-site with portable MIG and stick equipment, and a typical crack repair or hinge re-weld runs $120 to $280 depending on access and how much rust removal is required.

Cracked Frame and Hinge Welds

When a hinge tears away from the post or the frame cracks near a stress point, the gate is no longer safe to operate. We grind out the damaged metal, weld the joint back to full strength, and reinforce the area so it doesn’t fail again next season.

Every weld repair on an automatic gate ends with a full load test and a travel adjustment on the opener, because the new weld changes how the gate sits.

Rust Repair and Reinforcement

Surface rust is cosmetic. Deep rust pitting is structural. We cut out rotted sections, weld in new steel of matching thickness, and prime and paint the repair so it blends. If the gate is too far gone, we’ll tell you honestly and quote a replacement instead of chasing good money after bad.

In neighborhoods like Conway and College Park, we regularly repair gates that were installed 20 or 30 years ago and have finally rusted through at the bottom rail.

Commercial Gate Repair

Commercial gate repair is the service of keeping vehicle gates at businesses, warehouses, apartment complexes, and parking facilities operating safely and reliably. A commercial gate cycles hundreds of times a day, and when it fails, it stops deliveries, traps tenants, and creates a liability. Portcullis Gate Repair Orlando handles commercial slide gates, barrier arm gates, and cantilever gates, with most repairs running $350 to $850 depending on the type of gate and the failed component.

High-Cycle Operator Failures

Commercial operators run harder than residential ones, and the first things to go are usually the limit switches, the drive chain, or the gearbox. We carry parts for LiftMaster, BFT, and Linear commercial operators on the truck, which means most commercial repairs are done in a single visit instead of two or three.

We also check the safety loops and photo eyes on every commercial call, because a gate without working entrapment protection is an injury lawsuit waiting to happen.

Track and Roller Replacement

Cantilever and slide gates ride on steel or nylon rollers that wear down over time. When a roller seizes, the gate jerks and the motor labors. We replace rollers, straighten tracks, and perform gate realignment so it moves smoothly without strain.

This is the kind of repair that gets ignored until the gate jumps its track and goes down on a car. A scheduled roller replacement costs far less than an emergency track rebuild.

Iron Gate Repair

Iron gate repair covers the structural and mechanical work on ornamental iron gates, which are common throughout Orlando’s older neighborhoods like Thornton Park and Delaney Park. Iron gates are heavy, beautiful, and prone to specific failures: rust at the joints, broken decorative scrollwork, and hinges that wear oval and throw the gate out of square. Portcullis Gate Repair Orlando handles the full range, with decorative iron repairs typically $140 to $300 and structural repairs $250 to $600.

Broken Scrollwork and Pickets

Ornamental iron scrolls and pickets snap when rust thins the metal or when a car clips the gate. We match the existing pattern, weld in the replacement, and paint to blend. Matching old iron patterns is part welding skill and part patience, and we’ve gotten good at both.

If the gate is powder-coated, we’ll match the repair as closely as possible and be honest with you about how close the color will land.

Hinge Replacement on Heavy Iron Gates

Heavy iron gates eat hinges. When the hinge pin wears, the gate drops and the latch stops lining up. We replace hinge sets rated for the gate’s actual weight, not whatever was originally installed, which often means upgrading to sealed-bearing hinges that last decades instead of years.

The cost for a full hinge replacement on a standard driveway iron gate runs $180 to $320 in Orlando.

Sliding Gate Repair

Sliding gate repair is the service of fixing the horizontal track gates you see on larger Orlando properties, from rural lots in Bithlo to commercial yards along Orange Blossom Trail. Slide gates fail at the track, the rollers, or the rack and pinion drive. Portcullis Gate Repair Orlando repairs all three, with most sliding gate repairs running $250 to $550 depending on what gave out and how heavy the gate is.

Track Repair and Debris Clearing

Orlando’s sandy soil and oak leaves find their way into slide gate tracks constantly. A clogged track makes the gate bind, pop the breaker, or shear the drive pin. We clear the track, straighten bent sections, and set the rollers so the gate rides true again.

We’ll also show you how to keep the track clear between services, which saves you a service call down the road.

Rack and Pinion Drive Replacement

The rack is the toothed bar along the gate’s bottom edge; the pinion is the gear on the motor that drives it. When teeth wear down or break off, the gate slips and jerks. We replace damaged rack sections and install a new pinion gear sized to match, then adjust motor torque so the system isn’t overworking.

Expect $280 to $500 for a typical rack and pinion repair in Orlando, depending on gate length and access.

Wrought Iron Gate Repair

Wrought iron gate repair focuses on the hand-forged style gates that many Orlando homeowners prize for their curb appeal. True wrought iron is increasingly rare; most Florida gates are actually mild steel made to look like wrought iron. Either way, the failure patterns are similar: rust, sag, and broken welds. Portcullis Gate Repair Orlando repairs both authentic wrought iron and steel reproductions, with typical repairs running $150 to $450.

Straightening and Truing a Racked Gate

When a wrought iron gate racks, the frame becomes a parallelogram and the gate won’t latch. We straighten the frame with controlled pressure, weld reinforcement gussets at the corners, and re-hang the gate on new hinges if needed.

This is skilled work. Getting a twisted gate back to square without cracking the decorative elements takes experience, and our techs have been doing it since 2008.

Latch and Lock Alignment

A gate that won’t latch is more than an annoyance; it means the gate is out of alignment or the post has shifted. We re-align the latch, replace the strike plate or post hardware, and make sure the gate closes and locks without being forced.

For Orlando homeowners with automatic locks tied to their opener, we also handle lock repair to sync the lock solenoid with the operator so the gate locks on every close cycle.

Metal Gate Repair

Metal gate repair is the broad category covering steel and aluminum gates of all styles, from simple chain-link driveway gates to full aluminum estate gates. Each metal has its own personality: steel is strong but rusts, aluminum doesn’t rust but bends and cracks. Portcullis Gate Repair Orlando works on both, and most metal gate repairs in Orlando run $160 to $380.

Aluminum Gate Frame Cracks

Aluminum gates crack at weld points and at the corners where they’re bolted together. We weld aluminum with a spool gun, which most gate companies don’t even carry, and then reinforce the repair with an internal sleeve when the frame allows.

If the crack is in an extruded channel that can’t be sleeved, we’ll tell you straight and quote either a section replacement or a new gate.

Steel Gate Rust-Through Repair

Steel gates in Orlando rust fastest at the bottom rail, where sprinkler water and rain pool. We cut out the rotted section, weld in new steel, and seal the repair with primer and paint. The repair is stronger than the original because we use a thicker gauge than what was there before.

We always check the rest of the gate for hidden rust while we’re there, so you don’t get surprised by a second failure two months later.

Wood Gate Repair

Wood gate repair covers the fence-style wooden gates that secure backyards and side yards across Orlando, from Conway to Baldwin Park. Wood gates fail differently than metal ones: they rot, warp, and pull apart at the joints. Portcullis Gate Repair Orlando rebuilds sagging wood gates, replaces rotted posts, and installs anti-sag kits, with most wood gate repairs running $140 to $300.

Sagging Wood Gate Rebuild

A wood gate sags when the frame joints loosen or the hinges pull out of a rotted post. We re-square the frame, reglue and screw the joints, and replace the hardware with heavy-duty hinges and a tension rod or anti-sag kit.

In Orlando’s humidity, wood gates also swell. We plane and re-fit the gate so it swings freely in every season, not just when it’s dry.

Post Replacement in Concrete

When the post is rotted at ground level, the fix is a new post set in concrete. We dig out the old footing, set a pressure-treated post rated for ground contact, and re-hang the gate so it opens and closes cleanly.

Our techs leave the job site cleaner than they found it, which is one of the four Kingswell promises on every single job.

Brands We Service

We carry OEM parts and trained service experience for LiftMaster, FAAC, BFT, and Linear operators. LiftMaster is the most common residential operator in Orlando, and we stock their drive gears, control boards, and remote systems on the truck. FAAC operators, seen more often on high-end estate gates, need careful hydraulic or electromechanical diagnostics, and our techs know them well.

BFT and Linear show up frequently on Orlando commercial sites and older residential installs. We service them all, and when a brand has been discontinued, we cross-reference compatible parts from current-model stock. Whether you have a LiftMaster, FAAC, BFT, Linear, or any other make, the tech who arrives already knows the specific system on your property.

Signs You Need a Pro Right Now

• Gate reverses after closing on its own. This usually means the safety sensor or the closing force setting needs attention. It’s a safety feature doing its job, but it also leaves your property open, and running the gate this way for weeks shortens the operator’s life.
• The gate scrapes the ground or the track. Scraping means the gate has dropped, a hinge has worn, or the track is full of debris. Every cycle grinds away material. The longer it runs, the more expensive the repair gets.
• The gate jerks or shudders mid-travel. That judder is almost always a drive component failing, usually a chain, gear, or roller. The motor is fighting through it, and motors that fight fail early.
• You hear grinding or clicking from the operator. Clicking points to the capacitor or limit switch. Grinding points to the gearbox. Both get more expensive the longer you wait, and a smoked gearbox can total an otherwise good operator.
• The gate won’t stay open or closed. If the gate drifts or the operator cycles without touching the remote, there’s a control board or limit problem. A gate that moves on its own is a hazard to people and cars, and it needs a service call, not a reset button.

Our Process, Step by Step

1. 1
   Call us and describe the symptom. A live person answers at (850) 816-3017, any hour. We’ll ask what the gate is doing, what brand the operator is, and when it started. We’ll give you a price range on the phone before anyone drives out.
2. 2
   We commit to a real arrival window. You get a specific window, not “sometime Tuesday.” Our tech shows up in uniform, background-checked, and with identification. You’ll know who’s coming before the truck pulls into the driveway.
3. 3
   On-site diagnosis and written price. The tech inspects the gate, the operator, the track or hinges, and the safety system. Then you get a written price for the repair before a single bolt is turned. No surprises, no “while we’re here” upcharges.
4. 4
   Repair with OEM or matched parts. We carry common parts for LiftMaster, FAAC, BFT, and Linear on the truck. If a part isn’t on the truck, we tell you when it’ll be in and schedule the return visit at a time that works for you.
5. 5
   Cleanup, testing, and written guarantee. We test the full cycle, adjust the closing force, and verify the safety sensors. We leave the site clean and hand you a written Kingswell Guarantee stamped with the repair date and the 365-day coverage period. If it fails inside that year, we come back free.

How Much Does Gate Repair Cost in Orlando?

Our Service Area Near Orlando

We serve Orlando and the surrounding communities, including Gate Repair in Pine Hills, Winter Park, Conway, College Park, Baldwin Park, and Azalea Park. We also run calls to Gate Repair in Apopka, Oviedo, Casselberry, Maitland, and Altamonte Springs. Most Orlando calls get a same-day or next-day visit, and we’re available around the clock for emergencies. For the full picture on what we do in the area, see Gate Repair in Orlando.

Frequently Asked Questions About Gate Repair in Orlando

Schedule Your Gate Repair Service in Orlando Today

If your gate is acting up, call (850) 816-3017. A live person will answer, ask what’s going on, and give you a real price range before anyone drives out. Your estimate is free, your price is written before any work starts, and every repair is backed by the 365-Day Done Right Promise. We’re available around the clock for Orlando homeowners who need us now.

Written by Dean Prescott, Owner at Portcullis Gate Repair Orlando, serving Orlando since 2008.