Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Orlando
Gate installation in Orlando runs $1,800 to $6,500 for most residential jobs, and we can usually measure and quote within two business days. We’re the Portcullis Gate Repair Orlando team, and we’ve been the crew Orlando homeowners call when a sagging driveway gate or a corroded swing hinge needs more than a patch job. We know Orlando’s streets, its storm patterns, and its building stock, from the 1970s ranches off Conway Road to the newer infill homes popping up near the Hourglass District. Call (850) 816-3017 and you’ll get a live person, not a voicemail tree.
Why Portcullis Gate Repair Orlando Is Orlando’s Preferred Gate Installation Company
We’re independently owned and operated, and we answer to the same written standard as every Kingswell company: a price on paper before any work starts, a real arrival window, a clean job site, and a guarantee in writing. That matters in Orlando, where a gate that fails after the first good thunderstorm isn’t a hypothetical. Our technicians arrive in uniform, background-checked, and already familiar with the operator brand on your property before the truck pulls up.
When you call, you reach a person. Not a call center, not a callback queue. We coordinate dispatch and scheduling from our Orlando office, so the tech who shows up to your home off Curry Ford Road or near Lake Eola already knows the job. Orlando homeowners have called us after another company quoted $900 and then tried to bill $3,400 once the gate was apart in the driveway. We state the price first, in writing, and we don’t move off it unless the scope genuinely changes and you approve it before the additional work begins.
Our Gate Installation team carries parts for LiftMaster, FAAC, and BFT operators on the truck, which means fewer second trips and less waiting when a control board has fried. And because every installation carries our 365-Day Done Right Promise, the work isn’t done until it’s done and written down. If a repair fails inside a year, we come back at no charge. That promise is stamped on every invoice we give in Orlando, and it’s the main reason people tell their neighbors to call us.
Styles & brands we work with
Gate Installation Services in Orlando
Gate Installation Services across Orlando cover the full scope of getting a new gate from decision to operation: remove and haul the old gate, set or pour new posts, hang the gate on hardware sized for its actual weight, and connect or upgrade the operator. In Orlando, this almost always means accounting for wind load. A double ornamental steel driveway gate in Conway has to withstand hurricane gusts, not just a stiff breeze, and the hinge posts need to be engineered accordingly. Typical swing gate installation in Orlando runs $1,800 to $4,200 for a single gate, while a double gate usually lands between $3,500 and $6,500 including operator wiring.
Driveway Gate Installation and Post Setting
The foundation is where Orlando gate installs succeed or fail. Most 1980s and 1990s homes around Pine Hills and Azalea Park have original chain-link or aluminum drive gates set in shallow concrete footers. When we install a heavier gate, we core out the old footer and pour a new one at the depth the gate weight and wind exposure actually demand. Post lean is not a cosmetic issue; it’s the first sign the gate will bind and burn out the operator motor.
Pedestrian and Security Gate Install
We also install pedestrian gates at fence lines, side yards, and pool enclosures. These smaller gates often get the least attention and the most daily use, which is why we fit them with stainless hinges and closers rather than the zinc-plated hardware that rusts out after four or five Orlando summers. A standard pedestrian gate install runs $600 to $1,800 depending on material and whether we’re running a mag-lock or keypad.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation in Orlando
Electric Gate Installation in Orlando means more than mounting a motor. It means running power to the operator, installing safety photocells and edge sensors that meet current code, and grounding the system so an afternoon lightning strike doesn’t take out the board. Orlando’s daily summer thunderstorms are the leading killer of ungrounded gate electronics. A single swing gate operator install with power run typically costs $1,200 to $2,600 in Orlando; a double swing or slide gate operator adds another $800 to $1,500 on top of the gate work itself.
Operator Installation and Safety Sensor Retrofit
Homes built before 2000 in Orlando frequently have no safety photocells on their gates, or have photocells that stopped working years ago. Current Florida building code requires entrapment protection on every automated gate. When we install an operator, we include new photocells and a reversing edge, and we test them in front of you before we leave. If your gate is from 1995 and still runs, it almost certainly needs this retrofit done now.
Solar Gate Operator Install
For properties where running conduit across a wide driveway or a paver walkway isn’t practical, we install solar gate operators sized to Orlando’s actual sun hours, not a generic national average. Afternoon storms pack enough cloud cover to drain an undersized solar battery in a week. We spec panels and batteries that hold charge through several cloudy days, so the gate doesn’t quit the first time a storm front parks over the neighborhood.
Trusted Brands We Service in Orlando
Our technicians train on nine major gate-operator brands, and in Orlando we most often install and service LiftMaster, FAAC, and BFT systems. LiftMaster holds up well for residential swing and slide gates, FAAC is common on higher-end ornamental driveway gates around Baldwin Park, and BFT shows up on a lot of mid-2000s estate gates. Because we stock control boards, remotes, and safety sensors for these brands locally, we’re not waiting on a distributor in Tampa to get your gate running again. When a FAAC board fries during a Pine Hills lightning storm, we can usually have the replacement on the truck the same visit.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Installation Problems We See in Orlando Homes
- Zinc-plated hinge posts corroding at the ground line. Irrigation overspray in neighborhoods like Conway and College Park keeps the soil around post bases damp year-round. The zinc plating on cheaper hardware breaks down within a few seasons, the post rusts at the footing, and the gate starts to lean. Stainless hardware and sealed post penetrations stop this cycle.
- Lightning-damaged control boards on ungrounded operators. Orlando sits in one of the highest lightning-frequency zones in North America. A nearby strike can induce enough voltage into an ungrounded gate opener to knock out the board and the loop detector. Proper grounding and surge suppression are cheap compared to replacing a $700 board.
- Undersized tracks on 1980s and 1990s aluminum slide gates. Older Orlando homes with original aluminum slide gates often have tracks too light for a modern, heavier gate leaf. The rack and pinion bind, the motor strains, and the operator burns out. Installing a properly weighted track and drive system fixes the root cause, not just the symptom.
- Weld-point pitting on decorative aluminum gates in Baldwin Park and Celebration. Coastal-adjacent air carries enough salt to accelerate corrosion at the welds, even a few miles from the shore. The visible pitting is a warning sign; the weld underneath is often the first place the gate fails. We specify 5356 filler rod and post-weld sealing for these communities.
Pricing for Gate Installation in Orlando, FL
Here are the numbers we quote most often across Orlando. A single swing gate with operator runs $1,800 to $4,200. A double swing or slide gate with operator runs $3,500 to $6,500. A pedestrian gate with closer and latch runs $600 to $1,800. Operator-only installation including power and safety sensors runs $1,200 to $2,600. What moves the price: gate weight and width, whether we’re core-drilling a new footer or setting posts in fresh concrete, how far power has to run, and whether you need a wind-load rated operator. Every quote is free, and every price is written down before we touch a single bolt. Call (850) 816-3017 and we’ll send someone to measure.
We Also Serve Cities Near Orlando
If you’re outside the city center, we regularly install gates in Maitland, Altamonte Springs, Casselberry, and Apopka. Same Orlando office, same written Kingswell Guarantee. Wherever you are in the metro, the gate gets measured, quoted, and installed by the same crew standards.
Serving Orlando, FL - Our Local Coverage Area
We’re based in the Orlando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Orlando
Yes, if your gate is a double swing or a large slide gate and your home sits in a neighborhood like Conway or Pine Hills with no mature tree canopy or other windbreaks. Wind-load rating means the opener’s motor and gearbox are sized to move the gate against sustained pressure, not just its dead weight. An opener rated for 400 pounds of gate will stall in a 60-mph gust if the gate is catching wind like a sail. We check the gate’s square footage and exposure before we spec an operator, and we quote the right size the first time. Call (850) 816-3017 if you want a wind-load assessment on an existing gate.
Salt air and post-finish quality. Baldwin Park sits closer to the coastal breeze line, and that air carries enough salt to accelerate pitting on exposed metal, particularly at welds and hinge barrels. Winter Park, a few miles inland with more tree canopy and less direct salt transport, sees noticeably slower corrosion. The same zinc-plated hinge that lasts six years in Winter Park can fail in three or four in Baldwin Park. We specify stainless steel hinges and sealed welds for coastal-adjacent Orlando properties for exactly this reason. Call (850) 816-3017 and we’ll tell you what your existing hinge material is rated for.
Yes, but only if the panel and battery bank are sized for Orlando’s actual cloud patterns, not a generic national average. Afternoon thunderstorms here build fast and sit overhead for hours, and a solar opener need to store enough charge to keep cycling through several cloudy days. We install solar operators with panels rated higher than the motor’s idle draw and batteries sized for three to five days of poor sun. The panel also gets a proper storm mount so a gust doesn’t turn it into a sail. For an exact system spec and a written price, call (850) 816-3017.
Almost certainly. Pre-2000 gate installations in Orlando were rarely equipped with the entrapment-protection photocells and reversing edges that Florida code requires today. The original equipment, if it ever had photocells, is likely failed from twenty-plus summers of humidity and lightning. A 1995 gate that reverses on a child or a pet is a liability, not a convenience. We retrofit current-code photocells and safety edges on every gate we automate or service, and we test them while you watch. For an assessment of your 1995-era gate, call (850) 816-3017.
Sag prevention starts at the post and moves to the hinges. In Conway, where many homes have heavy ornamental steel or aluminum double gates, the lower hinge post takes the worst of the load and the moisture. We core out the old footing, pour a new footer at least 30 inches deep with stainless J-bolts, and set the post in concrete that actually cures before we hang the gate. Then we fit the gate with adjustable stainless hinges rated for more than the gate’s true weight. If the gate was already sagging, we correct it at the hinge and add an anti-sag truss cable or frame if the design allows. Call (850) 816-3017 and we’ll measure your gate and tell you what’s actually needed.
Call Portcullis Gate Repair Orlando at (850) 816-3017 for a free gate installation estimate. A live person answers, we measure, we give you a written price, and the work carries our 365-Day Done Right Promise in writing.
Written by Dean Prescott, Owner at Portcullis Gate Repair Orlando, serving Orlando and surrounding communities since 2008.